Atlanta, Georgia · serving dealers and manufacturers nationwide (404) 303-8575  ·  toll free 1-877-909-8575

Fastener line

Top Star adjustable distance fastener

A Swiss-made fastener that moves a door or window frame in and out, continuously, after it is fixed to the wall — so the opening is set by adjustment, not by shimming.

No more shimming

The Top Star adjustable distance fastener allows continuous two-way adjusting when installing doors and windows. Set the frame, drive the fastener, then turn it to move the frame toward or away from the rough opening until the reveal is even and the diagonal is right.

That single capability removes the most tedious part of a window install: cutting, stacking and re-cutting shims while a second person holds a level against the jamb. Where a conventional fastener locks the frame the moment it is driven, Top Star leaves the adjustment in the fastener.

Swiss made, white zinc

The fastener is manufactured in Switzerland and finished in white zinc — a neutral finish that does not stand out in a white frame reveal, and one that holds up in the interior and sheltered exterior conditions these fasteners are specified for.

Installation is covered step by step on the Top Star installation page, including the sequence most installers use to set a frame without shims.

Specifications

  • AdjustmentContinuous, two-way
  • OriginSwiss made
  • FinishWhite zinc
  • DriveTorx® head / crown
  • FramesDoor and window
  • ShimmingNot required

Sizes and quantities
Available lengths and carton quantities are confirmed on the quote. Call 1-877-909-8575 with the frame detail and we will match the fastener.

Where it is used

Three applications account for most Top Star volume: door frames, windows and hanging cabinets. The fourth — replacement work — is why installers keep a box on the truck.

The fastener is specified by what it replaces: shims.

Why installers ask for it by name

  • Continuous adjustment — no shim stack to re-cut.
  • Two-way movement, in and out, from one fastener.
  • White zinc finish that disappears in a white reveal.
  • Torx® drive that takes the torque of a structural setting.
  • One person can set a frame without a helper holding the level.
Typical applications
ApplicationWhat it solves
Door frames Plumb and square a frame after it is fixed, without pulling shims.
Windows Even the reveal and adjust the frame in two directions in one pass.
Hanging cabinets Fine distance adjustment where a cabinet meets a wall or a run.
Replacement work Adjusting an existing opening without disassembling the trim.

How the adjustment works

Turn the fastener one way and the frame moves toward the rough opening; turn it the other way and it moves away. Because the travel is continuous rather than stepped, the reveal can be set to the millimetre and then checked with a level — no shim stack to re-cut when the frame settles or the opening is out of square.

Before you order

Know the frame material, the gap between frame and rough opening, and the number of fasteners per frame. Those three numbers determine the length and the carton quantity.

After you install

Re-check the diagonal and the reveal after the door or sash is hung. Top Star still has adjustment left at that point, which is the whole reason to use it.